Teltonika
Teltonika upgrade procedure
For a step-by-step upgrade how-to, see Teltonika RUT/RUTX upgrade procedure.
List of Supported Teltonika Devices
Currently, the following Teltonika RUT and RUTX routers are supported:
RUT Routers |
RUTX Routers |
---|---|
Firmware Image Download
You can find the firmware images for RUT/RUTX routers at the Unwired Public Downloads. Make sure to get the latest one for your device.
Firmware file syntax
Please use images ending with -factory.ubi
to avoid upgrade rejection issues. The filename has the following syntax.
unwired-21.02-NNN-ipq40xx-generic-teltonika_rutx12-squashfs-nand-factory.ubi
unwired
, indicating it’s an Unwired Edge Cloud OS build21.02
, the major revision numberNNN
(for example,118
), the minor revision number (pick the highest one!)Device architecture
ipq40xx-generic
for RUTX routersramips-mt76x8
for RUT routers
Device model type, e.g.
teltonika_rutx12
The rest of the string contains package type and info
Important
RUT950 and RUT955 share image:
*teltonika_rut950_rut955-squashfs-factory.bin
Revision H7V3C0 requires the
h7v3c0
image:*teltonika_rut950_rut955-h7v3c0-squashfs-factory.bin
RUT951 and RUT956 share image:
*teltonika_rut951_rut956-squashfs-factory.bin
Technical Limitations
There are some devices that currently require attention due to technical limitations.
RUTX series
For all RUTX devices:
The
lan1
interface in the Unwired Edge Cloud Console
represents all physical LAN ports on the device.This will change in a future firmware release,
so all ports (lan2
,lan3
,lan4
if present) should be selected in the Unwired Edge Cloud Console.
Using the same VLAN ID on both LAN and Uplink interfaces is currently NOT possible;
Newer RUT devices
For newer RUT devices like RUT951
and RUT956
, tagged VLANs cannot be set alongside untagged VLANs.
The internal switch is using two untagged VLANs for (1) uplink and (2) downlink
Therefore, the switch cannot be set to a VLAN without disabling all the ‘regular’ non-VLAN functions.
This is a limitation also documented at Teltonika.
Factory Reset
Please refer to the official documentation for factory resetting the devices.
You will need to follow the section named Bootloader menu
. This ensures a full reset of the device, even if it is not accessible or bootable.
Hint
Hints on device reset On RUTX devices, the suggested time you need to hold the reset button during startup is too short. You actually need to hold it down for around 10 seconds.
Unwired Device Types
Refer to the following table to get the exact device type for your device.
Device |
Unwired Device Type |
---|---|
RUT241 |
UW-RUT241 |
RUT950 |
UW-RUT950 |
RUT951 |
UW-RUT951 |
RUT955 |
UW-RUT955 |
RUT956 |
UW-RUT956 |
RUTX11 |
UW-RUTX11 |
RUTX12 |
UW-RUTX12 |
RUTX14 |
UW-RUTX14 |
RUTX50 |
UW-RUTX50 |
Production Codes
Currently, the following Teltonika RUT/RUTX routers are supported:
RUT Production Codes
Router Model |
Production Codes |
---|---|
RUT241 0*** |
|
RUT950 0***** |
|
RUT951 0***** |
|
RUT955 0***** |
|
RUT956 0***** |
RUTX Production Codes
Router Model |
Production Codes |
---|---|
RUTX11 0***** |
|
RUTX12 0***** |
|
RTUX14 0***** |
|
RUTX50 0***** |